7m length Multifunction Infrared ray Hot air conveyor Drying Tunnel with preheating zone and cooling zone

Product Description

Hot air dryers are becoming more and more popular. They refer to the hot air flow entering the continuous hot air dryer. They are not reheated in the dryer. When drying, they only consume their own sensible heat, that is, outside the ejector, which is needed during the drying process. At the same time, the transfer of heat and mass (moisture) is completed to ensure that the moisture partial pressure (concentration) of the surface of the material is higher than the partial pressure of moisture in the external space to ensure that the temperature of the heat source is higher than the temperature of the material.

Features:

1. This machine is specially designed for drying the color stain or water based solvent.

2. Hot air can flatter the paint film, remove the air bubbles. With the IR heating, can fasten the thinner volatilize, and paint reaction. Shorten the drying time of the paint film, improve the working efficiency.

3. The wall of tunnel adopt double layer heat preservation materials, can keep the heat avoid being exhaust, and save the heating power

4. There is temperature controller for the IR tubes, can controll the heating start and stop, it make inner constant temperature be possible, and can be adjusted. Suitable to different drying purpose

5. The feeding cnveyor is controlled by the inverter, the feeding speed can be adjustable, suitable to different working purpose

6. Exhaust fan can exhaust the air with big moisture from inner tunnel, supply a dry inner tunnel for paint drying